Date: Sun, 29 Mar 1998 20:23:45 +0200
From: Philippe Teuwen <Philippe.Teuwen@student.ulg.ac.be>
To: d.tait@man.ac.uk
Subject: Your PICProg

Hi,

We've found your PIC Programmer (54...)
and as it's the only one we've found, it was very interesting.

So a friend of mine and myself have tried to make it.
And here is a 1-face PCB on a 16*10 card (European standard)
with, ok, several straps but it looks greater than "on the fly"
constructions.
Also 3 remarks:
Putting a LED diode under a 7812 seemed to be a good idea
but the voltage loss depends too much of the drain and 
the power supply, 2 real diodes are more stable.
Secundo: your VN10KM are painful to find and a BC550 with 
a protection resistor works perfectly.
Tertio: the BAR 28 can be replaced by any Schottky but a Schottky!
These corrections are made on UPPNEW.GIF.
Anyway your help was very useful to make our own programmers !
Be free to use and distribute our little contribution.
Just please attach our references:

Philippe Teuwen                 Doegox@ThePentagon.com
Jean-Christophe Nicaise         Dorian@ThePentagon.com

Bye.
Phil.
-- 
\.             /;                              _____    |  R idiculous
\`--.._      //:                             /   |   \  |  A ttitudes
 \/////\  __/;'  You may say I'm a dreamer  |    |    | |  C aused by
  '\////\'\`)'    but I'm not the only one  |  / | \  | |  I gnorance in
      \/'  |        DOEGOX, simply me...     \ __|__ /  |  S ociety's
      :'_\'\                                            |  M ind
     / | '" "' For HP fanciers or all others: http://doegox.home.ml.org/
     ~~~ `  ` E-Mail: Philippe.Teuwen@student.ulg.ac.be ICQ-UIN: 2686595
