Date: Fri, 05 Jun 1998 23:47:45 EDT       
From: fjjaeger@juno.com (Frederick J Jaeger)           
To: D.tait@man.ac.uk, phillippe.teuwen@student.ulg.ac.be
Subject: Circuit Board layout for Pic16C5X/xx

I have downloaded the files for your Pic16C5x/xx programmer (uppinfo.zip) 
and believe there may be a misrouted trace in bot.gif.

As drawn, there is a trace from PL4 to R10 that is connected to the
center pin of Q5 , the base.  I believe the trace to Q5 should go to the
lower pin, the emitter, and also to the 5 volt side of the regulator.

I noticed that the  files are relatively new and may not have been
reviewed.

Frederick Jaeger
fjjaeger@juno.com
